HardBirch

EFLAGS寄存器内容详解

时间:10-03-18 栏目:系统技术篇 作者:鲁智森也有文化 评论:0 点击: 1,986 次

EFLAGS寄存器介绍,摘自Intel指令集参考,方便大家快速查阅。

 

     The 32-bit EFLAGS register contains a group of status flags, a control flag, and a group of system flags. Figure 3-8 defines the flags within this register. Following initialization of the processor (either by asserting the RESET pin or the INIT pin), the state of the EFLAGS register is 00000002H. Bits 1, 3, 5, 15, and 22 through 31 of this register are reserved. Software should not use or depend on the states of any of these bits.

      Some of the flags in the EFLAGS register can be modified directly, using specialpurpose instructions (described in the following sections). There are no instructions that allow the whole register to be examined or modified directly.

The following instructions can be used to move groups of flags to and from the procedure stack or the EAX register: LAHF, SAHF, PUSHF, PUSHFD, POPF, and POPFD. After the contents of the EFLAGS register have been transferred to the procedure stack or EAX register, the flags can be examined and modified using the processor’s bit manipulation instructions (BT, BTS, BTR, and BTC).

    When suspending a task (using the processor’s multitasking facilities), the processor automatically saves the state of the EFLAGS register in the task state segment (TSS) for the task being suspended. When binding itself to a new task, the processor loads the EFLAGS register with data from the new task’s TSS.

    When a call is made to an interrupt or exception handler procedure, the processor automatically saves the state of the EFLAGS registers on the procedure stack. When an interrupt or exception is handled with a task switch, the state of the EFLAGS register is saved in the TSS for the task being suspended.

 

 

     As the IA-32 Architecture has evolved, flags have been added to the EFLAGS register, but the function and placement of existing flags have remained the same from one family of the IA-32 processors to the next. As a result, code that accesses or modifies these flags for one family of IA-32 processors works as expected when run on later families of processors.

声明: 本文由( 鲁智森也有文化 )原创编译,转载请保留链接: EFLAGS寄存器内容详解

EFLAGS寄存器内容详解:等您坐沙发呢!

发表评论


QQ群互动

Linux系统与内核学习群:194051772

WP建站技术学习交流群:194062106

魔豆之路QR

魔豆的Linux内核之路

魔豆的Linux内核之路

优秀工程师当看优秀书籍

优秀程序员,要看优秀书!

赞助商广告

友荐云推荐